Regeneration Circulating PumpDate:2016-7-12 20:15:43 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,
Regenerative circulating pump is vane pump, installed singly at the bottom of the EH oil station. It can be started or stopped based on the actual operation of the system.
To ensure the cleanliness of oil, it is suggested that the circulating pump should be in operation for a long time. The circulating pump needs to be started 8 hours before starting the main pump, thus the temperature of oil tank could remain even, especially when heated start-up is needed.
The circulating pump suck oil from the oil tank and regenerate the oil through two parallel filters, then send the oil back to the tank.
|Circulating Pump F3-V10-1S6S-1C-20|
REGULAR SPARES OF CIRCULATING PUMP
|Oil Inlet Filter of Circulating Pump OF3-08-3RV-10||Oil Inlet Filter of Circulating Pump DS101EA100V1-W|
|Oil Inlet Filter of Circulating Pump DL007002||Oil Return Filter of Circulating Pump V4051V3C03|
|Oil Return Filter of Circulating Pump DR405EA03V/-W||Oil Return Filter of Circulating Pump DR1A401EA03V/-W|
|Coupling Cushion D600B-589000B||EH Oil Circulating Pump D600B-589000B|
|Oil Seal 919772||Coupling of Circulating Pump|
AFTER-SERVICE FOR Circulating PUMPS
Clean, repair and maintenance.
Please contact us if your need is not listed above. SEND EMAIL